Cool Bed III® Cooling Mat for Dogs – Small

$42.95

SKU: 117000 Manufacturer: K & H

Description

New & Improved Cool Bed with Bonded Hydra Cool Core creates a gel like feel with a fail-safe seal. Simply add the recommended amount of water through the easy fill cap and adjust the comfort with the easy air valve. Our unique Cool Core diverts the liquid better than ever throughout the bed for advanced cooling power. The Cool Bed III is the choice for any dog owner looking to offer their pet a comfy, dry, cool place to relax.

Use indoors or outdoors
Does not require electricity
All-new exterior is our toughest yet
Superior cooling thanks to its specialized Cool Core

Size Small for dogs up to 25 lbs (17″W x 24″L )

Description
Reviews (0)

Description

How the Cool Bed III Works

Unlike a fluffy dog bed that is designed to retain heat to keep a dog warm, the Cool Bed III is designed to radiate heat back into the air or the floor surface to keep a dog cool. The water-saturated Cool Core inside the Cool Bed III absorbs the dog’s natural body temperature of 102°F and coverts it to room temperature, which is normally well below the dog’s body temperature. The difference created between the room temperature and the dog’s body temperature is how the Cool Bed III provides a cooler, refreshing surface for your dog.

For example, even if it is 80°F in your house, the Cool Bed III is 22 degrees cooler than a dog’s 102°F body temperature.

The Cool Bed III provides a permanent, natural, cool spot for your dog, inside or outside in temperatures under 95°F, without chemicals or electricity.

Reviews

There are no reviews yet.

Be the first to review “Cool Bed III® Cooling Mat for Dogs – Small”

How to Use

Filling & Usage

STEP 1: Remove the Cool Bed III from the box. Locate the filler cap on the bed and open it by grasping the base of the cap with one hand and the tab of the cap with the other. Pull the cap open. (See photo.)

Flatten the Cool Bed III and let it sit for a few a minutes to allow the cool core interior to retain its shape as all air has been removed for shipping.

STEP 2: Place the Cool Bed III in the intended location with the cap side of the bed up for filling. Place a towel under the filler cap end of the bed to absorb any accidentally spilled water. Using a calibrated container with a pour spout, begin carefully filling the Cool Bed III with cool water. (See photo.)The bed will take the following water quantities:

Small: 1–1.5 gallons
Medium: 2–3 gallons
Large: 4–6 gallons

Keep in mind, the more water used, the more cushioning and cooling capabilities the bed will have. You can experiment for the optimal feel of the Cool Bed III. Ultimately the recommended quantity of water for best cooling capabilities is as listed above.

STEP 3: Now that you have your Cool Bed III filled, close the filler cap and begin to knead the bed to help work the water into the Cool Core. (See photo.)Now pull open the air adjustment valve and gently work as much air out as you can, using sweeping motions across the Cool Bed III with your hands. Sweep the air towards the valve allowing the air to expel from the bed. Seal the valve when most of the air has been removed.

You will feel how comfortable the bed will be at this point. The bed should feel very soft and spongy and you should feel water squishing around inside the bed. Now decide if a little more water is desirable or if it’s just right for your pet. Add water if necessary, repeating the air removal process.

Note: A little air inside the bed will not affect the cooling capabilities of the Cool Bed III. If you choose, you may expel air as needed, though it’s not necessary.

Moving

Do not lift or move the bed by its corners as this will cause the foam core interior to separate from the sides. Fold the bed and wrap each arm around either end of the bed to move. (See photos.)

Emptying

STEP 1: Open the filler cap.

STEP 2: Roll the bed from opposite end, expelling the water out of the cap. (much like rolling up a sleeping bag).

STEP 3: Store with filler cap open.