Lifted Logic Web Design in Kansas City clock check_box_outline_blank check check_box chevron-down chevron-left chevron-right chevron-up google plus pinterest radio_button_checked radio_button_unchecked twitter youtube arrow-up send phone play speaker location-solid facebook avatar down-arrow bag cart sheep stethoscope rabbit reptile dog cat bird heart basket-grocery rx location instagram drug horse basket twitter next close right-arrow scroll

Replacement Carbon Brush for Metro Air Force Commander 2 Ct


SKU: 10141 Manufacturer: MetroVac

Replacement Carbon Brushes for Metro Air Force Commander. The carbon brush is approx. 2.5 cm (1”) long and should be replaced when it reaches 0.5 cm (1/4”). Once a year depending on use.

Carbon Brushes – Set of 2 (Black) Fits AFPG 1 AND 2, and AFTD 1 AND 2

(For use with pre-1998 models.)

Out of stock


There are no reviews yet.

Be the first to review “Replacement Carbon Brush for Metro Air Force Commander 2 Ct”

Your email address will not be published. Required fields are marked *

How to Use
  1. Unplug your Air Force Dryer
  2. Remove the blower and end cap by removing the 2 to 4 Phillip head screws normally found on all air force, commander and top gun dryers.
  3. After removing the blow end cap, the top of the motor with carbon brushes on either side will be exposed. (In some models the brushes are housed in black plastic boxes)
  4. With a 1/4″ nut driver, remove the black hex shaped screws.
  5. With needle nose pliers carefully diconnect the copper quick connect from the sides of each of the carbon brushes.
  6. Hold the carbon brush between thumb and index finger and gently rotate 1/4 turn counter clockwise and remove carbon brush.
  7. To install new set, repeat the above steps from 6 to 1.

We’re here to help

Not sure what your pet needs? Don’t see your brand? Contact us.

After 3 generations, we know a thing or two about animal care and we’re always a phone call away.